A platform for research: civil engineering, architecture and urbanism
A platform for research: civil engineering, architecture and urbanism
Use of Pile Driving Analysis for Assessment of Axial Load Capacity of Piles
Driven piles are commonly used in foundation engineering. Pile driving formulae, which directly relate the pile set per blow to the capacity of the pile, are commonly used to decide whether an installed pile will have the designed capacity. However, existing formulae have been proposed based on empirical observations and have not been validated scientifically, so some might over-predict pile capacity, while others may be too conservative. In this report, a more advanced and realistic model developed at Purdue University for dynamic pile driving analysis was used to develop more accurate pile driving formulae. These formulae are derived for piles installed in typical soil profiles: a floating pile in sand, an end-bearing pile in sand, a floating pile in clay, an end-bearing pile in clay and a pile crossing a normally consolidated clay layer and resting on a dense sand layer. The proposed driving formulae are validated through well documented case histories of driven piles. Comparison of the predictions from the proposed formulae with the results from static load tests, dynamic load tests and conventional formulae show that they produce reasonably accurate predictions of pile capacity based on pile set observations.
Use of Pile Driving Analysis for Assessment of Axial Load Capacity of Piles
Driven piles are commonly used in foundation engineering. Pile driving formulae, which directly relate the pile set per blow to the capacity of the pile, are commonly used to decide whether an installed pile will have the designed capacity. However, existing formulae have been proposed based on empirical observations and have not been validated scientifically, so some might over-predict pile capacity, while others may be too conservative. In this report, a more advanced and realistic model developed at Purdue University for dynamic pile driving analysis was used to develop more accurate pile driving formulae. These formulae are derived for piles installed in typical soil profiles: a floating pile in sand, an end-bearing pile in sand, a floating pile in clay, an end-bearing pile in clay and a pile crossing a normally consolidated clay layer and resting on a dense sand layer. The proposed driving formulae are validated through well documented case histories of driven piles. Comparison of the predictions from the proposed formulae with the results from static load tests, dynamic load tests and conventional formulae show that they produce reasonably accurate predictions of pile capacity based on pile set observations.
Use of Pile Driving Analysis for Assessment of Axial Load Capacity of Piles
R. Salgado (author) / Y. Zhang (author)
2012
35 pages
Report
No indication
English
Axial pile load tests with reaction piles
| British Library Conference Proceedings | 1998
Axial Pile Capacity of Large Diameter Cylinder Piles
| British Library Conference Proceedings | 2008
Pile-driving and supporting-capacity of piles
| Engineering Index Backfile | 1931
Axial Pile Capacity of Large Diameter Cylinder Piles
| ASCE | 2008
Axial Load Capacity of Tapered Piles
| British Library Conference Proceedings | 1989