A platform for research: civil engineering, architecture and urbanism
A platform for research: civil engineering, architecture and urbanism
Conventional and High-Strength Hooked Bars—Part 1: Anchorage Tests
This paper presents the results of an experimental study on the anchorage strength of conventional and high-strength steel hooked bars. Three hundred and thirty-seven exterior beam-column joint specimens were tested with compressive strengths ranging from 4300 to 16,500 psi (30 to 114 MPa). Parameters investigated included the number of hooked bars per specimen, bar diameter, side cover, amount of confining reinforcement, hooked bar spacing, hook bend angle, hook placement, and embedment length. Bar stresses at failure ranged from 22,800 to 144,100psi (157 and 994MPa). The majority of the hooked bars failed by a combination of front and side failure, with front failure being the dominant failure mode. Test results show that development lengths of hooked bars calculated based on ACI 318-14 are very conservative for No. 5 (No. 16) bars and become progressively less conservative with increasing bar size and concrete compressive strength.
Conventional and High-Strength Hooked Bars—Part 1: Anchorage Tests
This paper presents the results of an experimental study on the anchorage strength of conventional and high-strength steel hooked bars. Three hundred and thirty-seven exterior beam-column joint specimens were tested with compressive strengths ranging from 4300 to 16,500 psi (30 to 114 MPa). Parameters investigated included the number of hooked bars per specimen, bar diameter, side cover, amount of confining reinforcement, hooked bar spacing, hook bend angle, hook placement, and embedment length. Bar stresses at failure ranged from 22,800 to 144,100psi (157 and 994MPa). The majority of the hooked bars failed by a combination of front and side failure, with front failure being the dominant failure mode. Test results show that development lengths of hooked bars calculated based on ACI 318-14 are very conservative for No. 5 (No. 16) bars and become progressively less conservative with increasing bar size and concrete compressive strength.
Conventional and High-Strength Hooked Bars—Part 1: Anchorage Tests
Sperry, J (author) / Yasso, S / Searle, N / DeRubeis, M / Darwin, D / O’Reilly, M / Matamoros, A / Feldman, L. R / Lepage, A / Lequesne, R. D
ACI structural journal ; 114
2016
Article (Journal)
English
Anchorage Strength of Epoxy-Coated Hooked Bars,
| Online Contents | 1993
Conventional and High-Strength Hooked Bars—Part 2: Data Analysis
| Online Contents | 2017
Anchorage of 90-Degree Hooked Beam Bars in Exterior RC Joints
| British Library Conference Proceedings | 1999
Anchorage behavior of 90-degree hooked beam bars in reinforced concrete knee joints
| British Library Conference Proceedings | 1999
Anchorage behavior of 90-degree hooked beam bars in reinforced concrete beam-column joints
| British Library Conference Proceedings | 1996