A platform for research: civil engineering, architecture and urbanism
A platform for research: civil engineering, architecture and urbanism
Passive earth pressure on embedded vertical plate anchors in sand
Abstract Passive earth pressure on embedded anchor plates constitutes a viable resisting force for the design of underground structures. In the current practice, these forces are empirically calculated, ignoring the effects of the depth of embedment and the level of consolidation of the surrounding soil, which takes place during plate installation on the in situ stress levels. Accordingly, wide discrepancies between predicted and measured pullout capacities of these plates were reported in the literature. Numerical model was developed using finite-element technique and the constitutive law of Mohr–Coulomb to simulate the case of a retaining wall partially supported by an embedded anchor plate in sand. The results produced in this investigation showed that the passive earth pressure acting on anchor plates increases due to the increase of angle of shearing resistance and the overconsolidation ratio of sand, and it decreases due to an increase of the embedment depth of anchor. Design theories were developed for the case of embedded anchor plate in overconsolidated sand. The theories developed will satisfy the design needed in terms of allowable pullout load and/or displacement.
Passive earth pressure on embedded vertical plate anchors in sand
Abstract Passive earth pressure on embedded anchor plates constitutes a viable resisting force for the design of underground structures. In the current practice, these forces are empirically calculated, ignoring the effects of the depth of embedment and the level of consolidation of the surrounding soil, which takes place during plate installation on the in situ stress levels. Accordingly, wide discrepancies between predicted and measured pullout capacities of these plates were reported in the literature. Numerical model was developed using finite-element technique and the constitutive law of Mohr–Coulomb to simulate the case of a retaining wall partially supported by an embedded anchor plate in sand. The results produced in this investigation showed that the passive earth pressure acting on anchor plates increases due to the increase of angle of shearing resistance and the overconsolidation ratio of sand, and it decreases due to an increase of the embedment depth of anchor. Design theories were developed for the case of embedded anchor plate in overconsolidated sand. The theories developed will satisfy the design needed in terms of allowable pullout load and/or displacement.
Passive earth pressure on embedded vertical plate anchors in sand
Hanna, Adel (author) / Rahman, Farhana (author) / Ayadat, Tahar (author)
Acta Geotechnica ; 6
2011
Article (Journal)
English
BKL:
56.20
Ingenieurgeologie, Bodenmechanik
/
56.20$jIngenieurgeologie$jBodenmechanik
DDC:
624.15105
Passive earth pressure on embedded vertical plate anchors in sand
| Springer Verlag | 2011
Passive earth pressure on embedded vertical plate anchors in sand
| British Library Online Contents | 2011
Pullout capacity of inclined plate anchors embedded in sand
| Online Contents | 2014
Pullout capacity of inclined plate anchors embedded in sand
| British Library Online Contents | 2014
Load-Carrying Mechanism of Vertical Plate Anchors in Sand
| Online Contents | 2017