A platform for research: civil engineering, architecture and urbanism
A platform for research: civil engineering, architecture and urbanism
Fractal Characteristics of Coal Specimens’ Surface Cracks in Triaxial Conventional Compression and Cyclic Loading Tests
https://orcid.org/0000-0002-0202-0764
Abstract This paper presents an experimental investigation of the fractal characteristics about surface cracks of failed coal specimens in triaxial conventional compression and cyclic loading tests. The fractal characteristics under different confining pressures, test types, and cyclic loading frequencies are summarized and analyzed. The main achievements are as follows: (1) Under the same confining pressure, the average fractal value of failed coal specimen surface cracks in conventional compression test is obviously smaller than that in cyclic loading test for obvious differences in crack propagation modes between the two tests. Conventional compression test is beneficial to the development of large cracks in coal specimen, while cyclic loading test is helpful to the growth of small cracks. (2) The average fractal value of failed coal specimen surface cracks in cyclic loading test with the frequency of 0.25 Hz is slightly larger than that in cyclic loading test with the frequency of 0.5 Hz. The reason is that the lower the frequency of cyclic loading, the more surface cracks generated in coal specimen under the same cyclic number. (3) Whether in triaxial conventional compression test or cyclic loading test, the average fractal value of failed coal specimen surface cracks under the confining pressure of 5 MPa is larger than that under the confining pressure of 10 MPa because of the higher the confining pressure, the stronger the restriction of crack growth.
Fractal Characteristics of Coal Specimens’ Surface Cracks in Triaxial Conventional Compression and Cyclic Loading Tests
https://orcid.org/0000-0002-0202-0764
Abstract This paper presents an experimental investigation of the fractal characteristics about surface cracks of failed coal specimens in triaxial conventional compression and cyclic loading tests. The fractal characteristics under different confining pressures, test types, and cyclic loading frequencies are summarized and analyzed. The main achievements are as follows: (1) Under the same confining pressure, the average fractal value of failed coal specimen surface cracks in conventional compression test is obviously smaller than that in cyclic loading test for obvious differences in crack propagation modes between the two tests. Conventional compression test is beneficial to the development of large cracks in coal specimen, while cyclic loading test is helpful to the growth of small cracks. (2) The average fractal value of failed coal specimen surface cracks in cyclic loading test with the frequency of 0.25 Hz is slightly larger than that in cyclic loading test with the frequency of 0.5 Hz. The reason is that the lower the frequency of cyclic loading, the more surface cracks generated in coal specimen under the same cyclic number. (3) Whether in triaxial conventional compression test or cyclic loading test, the average fractal value of failed coal specimen surface cracks under the confining pressure of 5 MPa is larger than that under the confining pressure of 10 MPa because of the higher the confining pressure, the stronger the restriction of crack growth.
Fractal Characteristics of Coal Specimens’ Surface Cracks in Triaxial Conventional Compression and Cyclic Loading Tests
https://orcid.org/0000-0002-0202-0764
Abstract This paper presents an experimental investigation of the fractal characteristics about surface cracks of failed coal specimens in triaxial conventional compression and cyclic loading tests. The fractal characteristics under different confining pressures, test types, and cyclic loading frequencies are summarized and analyzed. The main achievements are as follows: (1) Under the same confining pressure, the average fractal value of failed coal specimen surface cracks in conventional compression test is obviously smaller than that in cyclic loading test for obvious differences in crack propagation modes between the two tests. Conventional compression test is beneficial to the development of large cracks in coal specimen, while cyclic loading test is helpful to the growth of small cracks. (2) The average fractal value of failed coal specimen surface cracks in cyclic loading test with the frequency of 0.25 Hz is slightly larger than that in cyclic loading test with the frequency of 0.5 Hz. The reason is that the lower the frequency of cyclic loading, the more surface cracks generated in coal specimen under the same cyclic number. (3) Whether in triaxial conventional compression test or cyclic loading test, the average fractal value of failed coal specimen surface cracks under the confining pressure of 5 MPa is larger than that under the confining pressure of 10 MPa because of the higher the confining pressure, the stronger the restriction of crack growth.
Fractal Characteristics of Coal Specimens’ Surface Cracks in Triaxial Conventional Compression and Cyclic Loading Tests
Duan, Huiqiang (author) / Zhang, Shuai (author)
2019
Article (Journal)
Electronic Resource
English
BKL:
57.00$jBergbau: Allgemeines
/
38.58
Geomechanik
/
57.00
Bergbau: Allgemeines
/
56.20
Ingenieurgeologie, Bodenmechanik
/
38.58$jGeomechanik
/
56.20$jIngenieurgeologie$jBodenmechanik
Deformation characteristics of gravels in triaxial compression tests and cyclic triaxial tests
| British Library Conference Proceedings | 1994
Fatigue Characteristics of Limestone under Triaxial Compression with Cyclic Loading
| DOAJ | 2018
Triaxial tension-compression tests for multiaxial cyclic plasticity
| British Library Online Contents | 1999
A device for cyclic triaxial tests of cubic asphalt concrete specimens
| British Library Conference Proceedings | 1997