A platform for research: civil engineering, architecture and urbanism
A platform for research: civil engineering, architecture and urbanism
Effects of Ultralow Temperature and Water Saturation on the Mechanical Properties of Sandstone
https://orcid.org/0000-0002-4107-8336
Abstract The surrounding rocks are subjected to ultralow temperatures in applications like liquid nitrogen fracturing, underground storage of liquefied natural gas and polar constructions etc. The mechanical properties of sandstone with different saturations under freezing temperature and after one ultralow temperature freeze–thaw cycle test conditions were investigated in this study. The uniaxial compressive strength (UCS) of both dry and saturated samples increases with the decrease in temperature except at − 90 °C under freezing temperature test conditions, while the UCS of saturated samples is lower than that of dry samples after one ultralow temperature freeze–thaw cycle due to the water softening effects and the damage induced during the water–ice phase transition. The failure patterns of dry samples are more complex than those of saturated samples under freezing temperature, which is also indicated in the lower brittleness index for the saturated samples. The ice cohesion effect and its creep deformation increase the plastic deformation, while decreasing the Young’s modulus of saturated samples under freezing temperature. In addition, the ice net formed in the connected pores significantly increases the sample tensile strength and makes its failure less severe. The UCS, Young’s modulus and brittleness index decrease with saturation under − 120 °C, while the tensile strength increases with saturation. Porosity reduction measured by computerized tomography for the saturated samples after one freeze–thaw cycle is largest at − 120 °C compared with those at − 60 °C and − 180 °C, which is certified by the pore filling shown in scanning electron microscope images.
Highlights Tensile strength is more sensitive to the variations of subzero temperatures compared with the compression strength.The cohesion and creep deformation of ice increase the plastic deformation while decrease the elastic modulus.Porosity reduces after one freeze-thaw cycle due to pore filling.Compression strength and brittleness index decrease while tensile strength increases with the saturation under − 120℃.Failure patterns of dry samples are more complex than those of saturated samples under low temperatures.
Effects of Ultralow Temperature and Water Saturation on the Mechanical Properties of Sandstone
https://orcid.org/0000-0002-4107-8336
Abstract The surrounding rocks are subjected to ultralow temperatures in applications like liquid nitrogen fracturing, underground storage of liquefied natural gas and polar constructions etc. The mechanical properties of sandstone with different saturations under freezing temperature and after one ultralow temperature freeze–thaw cycle test conditions were investigated in this study. The uniaxial compressive strength (UCS) of both dry and saturated samples increases with the decrease in temperature except at − 90 °C under freezing temperature test conditions, while the UCS of saturated samples is lower than that of dry samples after one ultralow temperature freeze–thaw cycle due to the water softening effects and the damage induced during the water–ice phase transition. The failure patterns of dry samples are more complex than those of saturated samples under freezing temperature, which is also indicated in the lower brittleness index for the saturated samples. The ice cohesion effect and its creep deformation increase the plastic deformation, while decreasing the Young’s modulus of saturated samples under freezing temperature. In addition, the ice net formed in the connected pores significantly increases the sample tensile strength and makes its failure less severe. The UCS, Young’s modulus and brittleness index decrease with saturation under − 120 °C, while the tensile strength increases with saturation. Porosity reduction measured by computerized tomography for the saturated samples after one freeze–thaw cycle is largest at − 120 °C compared with those at − 60 °C and − 180 °C, which is certified by the pore filling shown in scanning electron microscope images.
Highlights Tensile strength is more sensitive to the variations of subzero temperatures compared with the compression strength.The cohesion and creep deformation of ice increase the plastic deformation while decrease the elastic modulus.Porosity reduces after one freeze-thaw cycle due to pore filling.Compression strength and brittleness index decrease while tensile strength increases with the saturation under − 120℃.Failure patterns of dry samples are more complex than those of saturated samples under low temperatures.
Effects of Ultralow Temperature and Water Saturation on the Mechanical Properties of Sandstone
https://orcid.org/0000-0002-4107-8336
Abstract The surrounding rocks are subjected to ultralow temperatures in applications like liquid nitrogen fracturing, underground storage of liquefied natural gas and polar constructions etc. The mechanical properties of sandstone with different saturations under freezing temperature and after one ultralow temperature freeze–thaw cycle test conditions were investigated in this study. The uniaxial compressive strength (UCS) of both dry and saturated samples increases with the decrease in temperature except at − 90 °C under freezing temperature test conditions, while the UCS of saturated samples is lower than that of dry samples after one ultralow temperature freeze–thaw cycle due to the water softening effects and the damage induced during the water–ice phase transition. The failure patterns of dry samples are more complex than those of saturated samples under freezing temperature, which is also indicated in the lower brittleness index for the saturated samples. The ice cohesion effect and its creep deformation increase the plastic deformation, while decreasing the Young’s modulus of saturated samples under freezing temperature. In addition, the ice net formed in the connected pores significantly increases the sample tensile strength and makes its failure less severe. The UCS, Young’s modulus and brittleness index decrease with saturation under − 120 °C, while the tensile strength increases with saturation. Porosity reduction measured by computerized tomography for the saturated samples after one freeze–thaw cycle is largest at − 120 °C compared with those at − 60 °C and − 180 °C, which is certified by the pore filling shown in scanning electron microscope images.
Highlights Tensile strength is more sensitive to the variations of subzero temperatures compared with the compression strength.The cohesion and creep deformation of ice increase the plastic deformation while decrease the elastic modulus.Porosity reduces after one freeze-thaw cycle due to pore filling.Compression strength and brittleness index decrease while tensile strength increases with the saturation under − 120℃.Failure patterns of dry samples are more complex than those of saturated samples under low temperatures.
Effects of Ultralow Temperature and Water Saturation on the Mechanical Properties of Sandstone
Zhang, Decheng (author) / Lu, Guanju (author) / Wu, Jie (author) / Nie, Wen (author) / Ranjith, P. G. (author)
2023
Article (Journal)
Electronic Resource
English
BKL:
38.58
Geomechanik
/
56.20
Ingenieurgeologie, Bodenmechanik
/
38.58$jGeomechanik
/
56.20$jIngenieurgeologie$jBodenmechanik
RVK:
ELIB41
Fracture Mechanical Properties of Frozen Sandstone at Different Initial Saturation Degrees
| Online Contents | 2022
Microstructural Effects on Mechanical Properties of Shaly Sandstone
| British Library Online Contents | 2018
Water saturation effects on the fracturing mechanism of sandstone excavating by TBM disc cutters
| Springer Verlag | 2024