A platform for research: civil engineering, architecture and urbanism
A platform for research: civil engineering, architecture and urbanism
Steel-to-concrete bond after concrete splitting: test results
Abstract The definite trend towards the use of large-diameter rebars and the introduction of high-strength steels (f y=500 to 600 MPa) make it necessary to study the effects of longitudinal splitting on the steel-to-concrete bond. The study of splitting effects requires firstly basic tests to be performed in order to gather experimental information on bond and confinement stresses acting at the bar-to-concrete interface. For this purpose, three series of tests were recently carried out at the Politecnico di Milano. The results make it possible to ascertain a few basic properties of the bond after concrete splitting, and to formulate empirical constitutive laws regarding the stresses and the displacements (bar slip and opening of the splitting crack). All specimens consisted of a short deformed bar embedded in a concrete block, which had a preformed splitting crack in the plane passing through the bar axis: twelve specimens (Tests A and C) were fitted up with a round deformed bar having crescent-shaped lugs (Db=18 mm); seven specimens (Tests B) were fitted up with a specially machined deformed bar having a rectangular cross-section and straigth, lugs, so that concrete deterioration close to the bar could be investigated at the surface of the specimen, by means of the moiré technique. The tests were carried out at constant slip rate, up to very large slip values ( $${{\delta _{t_{max} } } \mathord{\left/ {\vphantom {{\delta _{t_{max} } } {D_b = 0.25 to 0.30}}} \right. \kern-\nulldelimiterspace} {D_b = 0.25 to 0.30}}$$ ); both the ascending and the descending branches of the stress-slip curves were measured, for four different values of the opening of the splitting crack. The agreement among the results of the three series is generally satisfactory and often very good: consequently, constitutive laws regarding the four main variables (crack opening and bar slip, shear and confinement stresses) can be worked out, as will be shown in a companion paper on constitutive relationships and on concrete deterioration at the bar-to-concrete interface.
Steel-to-concrete bond after concrete splitting: test results
Abstract The definite trend towards the use of large-diameter rebars and the introduction of high-strength steels (f y=500 to 600 MPa) make it necessary to study the effects of longitudinal splitting on the steel-to-concrete bond. The study of splitting effects requires firstly basic tests to be performed in order to gather experimental information on bond and confinement stresses acting at the bar-to-concrete interface. For this purpose, three series of tests were recently carried out at the Politecnico di Milano. The results make it possible to ascertain a few basic properties of the bond after concrete splitting, and to formulate empirical constitutive laws regarding the stresses and the displacements (bar slip and opening of the splitting crack). All specimens consisted of a short deformed bar embedded in a concrete block, which had a preformed splitting crack in the plane passing through the bar axis: twelve specimens (Tests A and C) were fitted up with a round deformed bar having crescent-shaped lugs (Db=18 mm); seven specimens (Tests B) were fitted up with a specially machined deformed bar having a rectangular cross-section and straigth, lugs, so that concrete deterioration close to the bar could be investigated at the surface of the specimen, by means of the moiré technique. The tests were carried out at constant slip rate, up to very large slip values ( $${{\delta _{t_{max} } } \mathord{\left/ {\vphantom {{\delta _{t_{max} } } {D_b = 0.25 to 0.30}}} \right. \kern-\nulldelimiterspace} {D_b = 0.25 to 0.30}}$$ ); both the ascending and the descending branches of the stress-slip curves were measured, for four different values of the opening of the splitting crack. The agreement among the results of the three series is generally satisfactory and often very good: consequently, constitutive laws regarding the four main variables (crack opening and bar slip, shear and confinement stresses) can be worked out, as will be shown in a companion paper on constitutive relationships and on concrete deterioration at the bar-to-concrete interface.
Steel-to-concrete bond after concrete splitting: test results
Gambarova, Pietro G. (author) / Rosati, Gian Paolo (author) / Zasso, Barbara (author)
Materials and Structures ; 22 ; 35-47
1989-01-01
13 pages
Article (Journal)
Electronic Resource
English
Test results of concrete-steel bond
| Engineering Index Backfile | 1929
Steel-to-concrete bond after concrete splitting: constitutive laws and interface deterioration
| Springer Verlag | 1989
Splitting Prism Test Method to Evaluate Concrete-to-Concrete Bond Strength
| Online Contents | 1999
Splitting Prism Test Method to Evaluate Concrete-to-Concrete Bond Strength
| British Library Online Contents | 1999
Bond and splitting in reinforced concrete: test results on bar pull-out
| Springer Verlag | 1996