A platform for research: civil engineering, architecture and urbanism
A platform for research: civil engineering, architecture and urbanism
Experimental investigations and verification of debonding strain of RHSC continuous beams strengthened in flexure with externally bonded FRPs
Abstract Although many in-situ RC beams are of continuous constructions, there has been very little research on the behavior of such beams with external reinforcement. This article presents an experimental program conducted to study the flexural behavior and redistribution of moment of reinforced high strength concrete (RHSC) continuous beams strengthened with carbon and glass-fiber-reinforced polymer (CFRP and GFRP) sheets. The program consists of six RHSC continuous (two-span) beams with overall dimensions equal to 250 × 150 × 6000 mm. One beam was not strengthened and was tested as a control beam. Five beams were strengthened with CFRP and GFRP in flexure along their sagging and hogging regions. The main parameters including type of FRP (GFRP or CFRP), the different ratios of CFRP sheet and effectiveness of end anchorage. The test results showed that the use of GFRP sheet in strengthening of continuous beam reduced loss in ductility and moment redistribution but it did not significantly increase the ultimate strength of them. The use of end anchorage in strengthened continuous beams increased the ultimate strength and moment redistribution. The moment enhancement ratio of the strengthened continuous beams was significantly higher than the ultimate load enhancement ratio in the same beam. Also existing international codes and model such as ACI, fib, JSCE, Teng and Toutanji for prediction of IC debonding strain or stress of strengthened continuous beams are verified. Verifications were carried out based on the test results in this research and the published literature on RC continuous beams strengthened with FRP.
Experimental investigations and verification of debonding strain of RHSC continuous beams strengthened in flexure with externally bonded FRPs
Abstract Although many in-situ RC beams are of continuous constructions, there has been very little research on the behavior of such beams with external reinforcement. This article presents an experimental program conducted to study the flexural behavior and redistribution of moment of reinforced high strength concrete (RHSC) continuous beams strengthened with carbon and glass-fiber-reinforced polymer (CFRP and GFRP) sheets. The program consists of six RHSC continuous (two-span) beams with overall dimensions equal to 250 × 150 × 6000 mm. One beam was not strengthened and was tested as a control beam. Five beams were strengthened with CFRP and GFRP in flexure along their sagging and hogging regions. The main parameters including type of FRP (GFRP or CFRP), the different ratios of CFRP sheet and effectiveness of end anchorage. The test results showed that the use of GFRP sheet in strengthening of continuous beam reduced loss in ductility and moment redistribution but it did not significantly increase the ultimate strength of them. The use of end anchorage in strengthened continuous beams increased the ultimate strength and moment redistribution. The moment enhancement ratio of the strengthened continuous beams was significantly higher than the ultimate load enhancement ratio in the same beam. Also existing international codes and model such as ACI, fib, JSCE, Teng and Toutanji for prediction of IC debonding strain or stress of strengthened continuous beams are verified. Verifications were carried out based on the test results in this research and the published literature on RC continuous beams strengthened with FRP.
Experimental investigations and verification of debonding strain of RHSC continuous beams strengthened in flexure with externally bonded FRPs
Akbarzadeh Bengar, H. (author) / Maghsoudi, A. A. (author)
Materials and Structures ; 43 ; 815-837
2009-09-22
23 pages
Article (Journal)
Electronic Resource
English
| British Library Online Contents | 2010
Experimental investigation of RC beams strengthened in flexure with externally-bonded CFRP strips
| British Library Conference Proceedings | 1997