A platform for research: civil engineering, architecture and urbanism
A platform for research: civil engineering, architecture and urbanism
Stability of three-dimensional printable foam concrete as function of surfactant characteristics
Extrudability is one of the most critical factors when designing three-dimensional printable foam concrete. The extrusion process likely affects the foam stability which necessitates the investigation into surfactant properties particularly for concrete mixes with high foam contents. Although many studies have been conducted on traditional foam concrete in this context, studies on three-dimensional printed foam concrete are scarce. To address this research gap, the effects of surfactant characteristics on the stability, extrudability, and buildability of three-dimensional printed foam concrete mixes with two design densities (1000 and 1300 kg/m3) using two different surfactants and stabilizers (synthetic-based sodium lauryl sulfate stabilized with carboxymethyl cellulose sodium salt, and natural-based hingot surfactant stabilized with xanthan gum) were investigated in this study. Fresh density tests were conducted before and after the extrusion to determine stability of the foam concrete. The results were then correlated with surfactant qualities, such as viscosity and surface tension, to understand the importance of key parameters in three-dimensional printing of foam concrete. Based on the experimental results, surfactant solu1tion with viscosity exceeding 5 m Pa·s and surface tension lower than 31 mN/m was recommended to yield stable three-dimensional printable foam concrete mixes. Nevertheless, the volume of foam in the mix significantly affected the printability characteristics. Unlike traditional foam concrete, the variation in the stabilizer concentration and density of concrete were found to have insignificant effect on the fresh-state-characteristics (slump, slump flow, and static yield stress) and air void microstructure of the stable mixes.
Stability of three-dimensional printable foam concrete as function of surfactant characteristics
Extrudability is one of the most critical factors when designing three-dimensional printable foam concrete. The extrusion process likely affects the foam stability which necessitates the investigation into surfactant properties particularly for concrete mixes with high foam contents. Although many studies have been conducted on traditional foam concrete in this context, studies on three-dimensional printed foam concrete are scarce. To address this research gap, the effects of surfactant characteristics on the stability, extrudability, and buildability of three-dimensional printed foam concrete mixes with two design densities (1000 and 1300 kg/m3) using two different surfactants and stabilizers (synthetic-based sodium lauryl sulfate stabilized with carboxymethyl cellulose sodium salt, and natural-based hingot surfactant stabilized with xanthan gum) were investigated in this study. Fresh density tests were conducted before and after the extrusion to determine stability of the foam concrete. The results were then correlated with surfactant qualities, such as viscosity and surface tension, to understand the importance of key parameters in three-dimensional printing of foam concrete. Based on the experimental results, surfactant solu1tion with viscosity exceeding 5 m Pa·s and surface tension lower than 31 mN/m was recommended to yield stable three-dimensional printable foam concrete mixes. Nevertheless, the volume of foam in the mix significantly affected the printability characteristics. Unlike traditional foam concrete, the variation in the stabilizer concentration and density of concrete were found to have insignificant effect on the fresh-state-characteristics (slump, slump flow, and static yield stress) and air void microstructure of the stable mixes.
Stability of three-dimensional printable foam concrete as function of surfactant characteristics
Front. Struct. Civ. Eng.
Boddepalli, Uday (author) / Gandhi, Indu Siva Ranjani (author) / Panda, Biranchi (author)
Frontiers of Structural and Civil Engineering ; 17 ; 935-947
2023-06-01
13 pages
Article (Journal)
Electronic Resource
English
Investigation on Structural Build-Up of 3D Printable Foam Concrete
| Springer Verlag | 2020
Rheology of 3D Printable Lightweight Foam Concrete Incorporating Nano-Silica
| Springer Verlag | 2019
Fresh and Hardened Properties of 3D Printable Foam Concrete Containing Porous Aggregates
| Springer Verlag | 2022