Modelling of fibre–cohesive soil mixtures: Fid-Bau Portal

Modelling of fibre–cohesive soil mixtures

Diambra, A. / Ibraim, E.

Abstract A new constitutive model for fibre-reinforced cohesive soil is proposed. The model combines a Cam-Clay like bounding surface model with an elastic–plastic one-dimensional fibrous element model. A “smearing procedure”, which can consider any spatial distribution of fibre orientation, is employed to transform discrete tensile forces developed in the fibres into stresses for the composite material. The fibre stress contribution is bounded by both degradation of soil–fibre bonding due to pull-out mechanism and tensile strength of the fibres. Eventual occurrence of fibre breakage is also considered. The model performances are analysed for both consolidation and shearing loading modes, and qualitative comparison is performed with experimental data available in the literature. For consolidation loading, tensile stresses are not developed in the fibres and thus the fibre effect is rather limited. For drained shear loading, addition of fibres can result in a consistent shear strength increase. The beneficial effect of fibres seems to be controlled by two parameters: the fibre tensile stiffness and the fibre/soil strain ratio that accounts for any possible slippage or shear deformation at the fibre/soil matrix interface. For undrained shear loading, the strengthening effect of the fibres appears to be counteracted by the increase in pore water pressure, induced by the additional confining contribution of the fibres. In agreement with published experimental data, the model suggests also that the moisture content is a key factor governing fibre effectiveness for undrained shearing. Finally, analysis of the model predicted critical states for fibre-reinforced cohesive soil is provided.