Evaluation of pile capacity from CPT and pile setup phenomenon: Fid-Bau Portal

Evaluation of pile capacity from CPT and pile setup phenomenon

Haque, Md. Nafiul / Abu-Farsakh, Murad Y. / Zhang, Zhongjie

Piles driven in cohesive soils usually experience a large increase in capacity over time, known as setup or freeze. This paper presents the field results of two test piles that were driven in two different locations of Louisiana to evaluate the pile setup behavior. Laboratory and in situ soil testings (cone penetration test, CPT) were conducted to characterize the subsurface soil properties. Several dynamic load tests (DLTs) and one static load test (SLT) were conducted on each test pile at different times after end of driving (EOD) to quantify the magnitude and rate of setup. The test pile in one site was instrumented with vibrating wire strain gages to calculate the load-distribution along the length of the pile during the static load test. With the aid of Case Pile Wave Analysis Program (CAPWAP®) analyses and load distribution plots from strain gages, skin friction and end-bearing capacities were measured separately. The load test results showed that the setup was mainly attributed to increase in skin friction with time and end-bearing capacity remained almost constant. The load test results also showed that setup behavior was more significant in soft cohesive soil. The pile capacity of one test pile was also evaluated using different CPT methods (such as Schmertmann, De Ruiter and Beringen, LCPC). The result showed that all the methods can estimate the pile capacity with good accuracy.