Mixed-mode crack surface interference under cyclic shear loads: Fid-Bau Portal

Mixed-mode crack surface interference under cyclic shear loads

Yu, X. / Abel, A.

A previous modelling analysis predicted that crack surface interference under cyclic shear loads is a combination of cyclic shear attenuation and cyclic wedge-opening. In the present study, experimental evidence is provided on notched thin-walled tubular specimens to evaluate the modelling predictions. Tests were carried out with varied static tensions superimposed on fully reversed (R_tau = -1) or pulsating (R_tau = 0) cyclic shear loads. The crack surface interference was measured by near-tip strain gauge methods. Based on the single and dual strain gauge readings, the strains induced by the mode I and II interference are separately identified so that the cyclic wedge-opening behaviour was noted as a companion of the cyclic shear attenuation. The crack surface interference under cyclic shear loads is compared with the influence from varied static tensions and shear stress ratios. A comparison of the mode I crack surface interference is also made between the conditions with cyclic shear loads and cyclic tensile loads. Finally, the characteristics of crack surface displacements are discussed, and the experimental results of effective mode I and II stress intensity ranges are compared with the modelling predictions.