Strengthening of interior slab-column connections using a combination of FRP sheets and steel bolts: Fid-Bau Portal

Strengthening of interior slab-column connections using a combination of FRP sheets and steel bolts

Harajli, M.H. / Soudki, K.A. / Kudsi, T.

The results of an experimental investigation undertaken to evaluate a new technique for strengthening interior slab-column connection in combined flexural and shear modes are presented. The technique consists of using a combination of shear bolts inserted into holes and prestressed against the concrete surface for improving the punching shear capacity, and external [fiber-reinforced polymer (FRP)] reinforcement bonded to the tension face of the slabs in two perpendicular directions for increasing the flexural strength of the slabs. Square slab specimens of 670 X 670 mm dimensions were tested and the main test variables included the ratio of steel reinforcement (1.0 and 1.5 %), span-depth ratio or thickness (55 and 75 mm) of the slabs, area, and configuration of steel bolts, and area of FRP reinforcement. It was found that the use of shear bolts alone improves the punching shear strength and increases the ductility of failure by changing the failure mode from punching to flexural. However, the use of a combination of shear bolts and a moderate amount of FRP reinforcement increased the flexural strength and resulted in a substantial improvement of the punching shear capacity of the slabs. The corresponding increases attained levels between 34 and 77 %. A design approach is presented for evaluating the ultimate capacity of the slab-column connections when strengthened using the proposed strengthening technique. Strength results predicted by the proposed approach were in good agreement with the experimental results.