A platform for research: civil engineering, architecture and urbanism
A platform for research: civil engineering, architecture and urbanism
Strength and capillary water absorption of lightweight concrete under different curing conditions
This paper reports an experimental study carried out to investigate the influence of addition of pozzolanic materials and curing regimes on the mechanical properties and the capillary water absorption (sorptivity) characteristics of lightweight concrete. A control lightweight concrete mixture made with lightweight volcanic pumice containing only Portland cement (PC) and fly ash lightweight concrete mixture containing 20% of fly ash (FA) and 10% of silica fume (SF) as a replacement of the cement by weight is prepared. The specimens are prepared and cured in three different curing conditions (standard 20 deg C water, sealed and air cured) for the periods of 3, 7 and 28 days. At the end of each curing period, compressive and tensile strengths and ultrasonic pulse velocity (UPV) values are determined; sorptivity coefficients are recorded at 28 days. The results indicate that SF specimens give higher compressive and tensile strength and lower sorptivity coefficient values than corresponding PC and FA concrete specimens, regardless of curing regime and age of concrete. The results also show a good correlation between the strength development of concrete and its sorptivity, i.e., as the compressive and tensile strengths increased due to the hydration, the sorptivity coefficients decreased significantly.
Strength and capillary water absorption of lightweight concrete under different curing conditions
This paper reports an experimental study carried out to investigate the influence of addition of pozzolanic materials and curing regimes on the mechanical properties and the capillary water absorption (sorptivity) characteristics of lightweight concrete. A control lightweight concrete mixture made with lightweight volcanic pumice containing only Portland cement (PC) and fly ash lightweight concrete mixture containing 20% of fly ash (FA) and 10% of silica fume (SF) as a replacement of the cement by weight is prepared. The specimens are prepared and cured in three different curing conditions (standard 20 deg C water, sealed and air cured) for the periods of 3, 7 and 28 days. At the end of each curing period, compressive and tensile strengths and ultrasonic pulse velocity (UPV) values are determined; sorptivity coefficients are recorded at 28 days. The results indicate that SF specimens give higher compressive and tensile strength and lower sorptivity coefficient values than corresponding PC and FA concrete specimens, regardless of curing regime and age of concrete. The results also show a good correlation between the strength development of concrete and its sorptivity, i.e., as the compressive and tensile strengths increased due to the hydration, the sorptivity coefficients decreased significantly.
Strength and capillary water absorption of lightweight concrete under different curing conditions
Festigkeit und Kapillarwasserabsorption von Leichtbeton bei verschiedenen Aushärtebedingungen
Bozkurt, Nusret (author) / Yazicioglu, Salih (author)
2010
7 Seiten, 7 Bilder, 2 Tabellen, 26 Quellen
Article (Journal)
English
Durability of lightweight OPS concrete under different curing conditions
| Online Contents | 2009
Durability of lightweight OPS concrete under different curing conditions
| British Library Online Contents | 2010
Durability of lightweight OPS concrete under different curing conditions
| Springer Verlag | 2009
Durability of lightweight OPS concrete under different curing conditions
| Online Contents | 2009
Performance of Lightweight Volcanic Pumic Concrete under Different Curing Conditions
| British Library Conference Proceedings | 1999