Comparison of corrosion resistance of cordierite and silicon carbide diesel particulate filters to combustion products of diesel fuel containing Fe and Ce additives / D. O'Sullivan, S. Hampshire, M.J. Pomeroy, M.J. Murtagh -- Overview of ceramic materials for diesel particulate filter applications / Willard A. Cutler -- Soot mass limit analysis of SiC DPF / Hiroki Sato, Kazutake Ogyu, Kazunori Yamayose, Atsushi Kudo, Kazushige Ohno -- A mechanistic model for particle deposition in diesel particluate filters using the lattice-Boltzmann technique / Mark Stewart, David Rector -- Development of catalyzed diesel particulate filter for the control of diesel engine emissions / Yinyan Huang, Zhongyuan Dang -- The use of transparent PLZT ceramics in a biochemical thin film interferometric sensor / Thomas Nicolay -- Low cost synthesis of alumina reinforced Fe-Cr-Ni alloys / Thomas Selchert, Rolf Janssen, Nils Claussen -- High temperature behaviour of ceramic foams from Si/Sic-filled preceramic polymers / Juergen Zeschky, Thomas Hoefher, Henning Dannheim, Dieter Loidl, Stephan Puchegger, Herwig Peterlik -- Stabilization of counter electrode for NASICON based potentiometric CO₂ sensor / Yuji Miyachi, Go Sakai, Kengo Shimanoe, Noboru Yamazoe -- Microstructural control of SnO₂ thin films by using polyethylene glycol-mixed sols / Go Sakai, Chiaki Sato, Kengo Shimanoe, Noboru Yamazoe -- Mixed-potential type ceramic sensor for NOx monitoring / Balakrishnan Nair, Jesse Nachlas, Michael Middlemas -- Electrode materials for mixed-potential NOx sensors / D.L. West, F.C. Montgomery, T.R. Armstrong -- Study of high surface area alumina and Ga-alumina materials for denox catalyst applications / Svetlana M. Zemskova, Julie M. Faas, Carrie L. Boyer, Paul W. Park, J. Wen, I. Petrov -- Development of strong photocatalytic fiber and environmental purification / Hiroyuki Yamaoka, Yoshikatsu Harada, Teruaki Fujii, Shinichirou Otani, Toshihiro Ishikawa -- Processing of biomorphous SiC ceramics from paper preforms by chemical vapor infiltration and reaction (CVI-R) technique / Daniela Almeida Streitwieser, Nadja Popovska, Helmut Gerhard, Gerhard Emig -- Formation of porous structures by directional solidification of the eutectic / F.W. Dynys, A. Sayir -- High surface area carbon substrates for environmental applications / Kisho R.P. Gadkaree, Tinghong Tao, Willard A. Cutler -- Development of high surface area monoliths for sulfur removal / L. He, L.K. Owens, W.A. Cutler, C.M. Sorensen -- Processing of porous biomorphic TiC ceramics by chemical vapor infiltration and reaction (CVI-R) technique / Nadja Popovska, Daniela Almeida Streitwieser, Chen Xu, Helmut Gerhard, Heino Sieber -- Charge transport model in gas-solid interface for gas sensors / Sung Pil Lee, Yer-Kyung Yoon -- Corrosion resistant refractory ceramics for slagging gasifier environment / Eugene Medvedovski, Richard E. Chinn -- Influence of the dopants and the metal electrodes on the electrical response of hematite based humidity sensors / Jean-Marc Tulliani, Paola Palmero, Pierre Bonville -- Light weight ceramic sandwich structure from preceramic polymers / Thomas Hoefner, Juergen Zeschky, Michael Scheffler, Peter Greil -- Selective catalytic reduction and NOx storage in vehicle emission control / Eric N. Coker, Sonia Hammache, Donovan A. Pefia, James E. Miller -- Ballistic impact of silicon carbide with tungsten carbide spheres / M.J. Normandia, B. Leavy -- Toughness and hardness of LPS-SiC and LPS-SiC based composites / Karl A. Schwetz, Thomas Kempf, Dirk Saldsieder, Rainer Telle -- Indentation testing of armor ceramics / Eugene Medvedovski, Partho Sarkar -- Metallic bonding of ceramic armor using reactive multilayer foils / A. Duckham, M. Brown, E. Besnoin, D. Van Heerden, O.M. Knio, T.P. Weihs -- Strain rate effects on fragment size of brittle materials / Fenghua Zhou, Jean-Francois Molinari, K.T. Ramesh.

Ultra-high-temperature tribometer up to 1600 °C / M. Gienau, N. Kelling, N. Köhler, M. Woydt -- Erosion of bare and coated polymer matrix composites by solid particle impingement / Kazuhisa Miyoshi, James K. Sutter, Richard A. Horan, Subhash K. Naik, Randall J. Cupp -- The effect of thermal mismatch on stresses, morphology and failures in thermal barrier coatings / J. Shi, S. Darzens, A.M. Karlsson -- Mechanically induced delamination cracking in thermal barrier composites / Takashi Wakui, Jürgen Malzbender, Egbert Wessel, Rolf W. Steinbrech, Lorenz Singheiser -- Investigation of thermal fatigue life of thermal barrier coating / Y. Ohtake, T. Natsumura -- Evaluation of two new thermal barrier coating materials produced by APS and EB-PVD / B. Saruhan, U. Schulz, P. Bengtsson, R. Knoedler, P. Moretto, F. Taricco, R. Vassen, G. Pracht, C. Friedrich, O. Lavigne, C. Siry, N. Coignard, R. Wing -- Low thermal conductivity ceramics for turbine blade thermal barrier coating application / Uwe Schulz, P. Moretto, B. Saint-Ramond, A. Vanlieshout, O. Lavigne, A. Börger -- Solution precursor plasma spray : a promising new technique for forming functional nanostructured films and coatings / Xinqing Ma, Jeff Roth, T.D. Xiao, L.D. Xie, M. Gell, E.H. Jordan, N.P. Padture -- Further improvement of the properties of sprayed TBC using hollow PSZ spheres / Ghislaine Bertrand, Priscille Roy, Rémy Mévrel, Cathy Meunier, Didier Demange -- Effects of bond coat surface roughness and pre-oxidation on the thermal cycling lifetime of thermal barrier coatings / J. Liu, Y.H. Sohn -- Chemical etching of silicon carbide ceramic surface in chlorine-containing gas mixtures / A.V. Zinovev, J.F. Moore, J. Hryn, O. Auciello, J. Carlisle, M.J. Pellin -- Micromechanisms affecting macroscopic deformation of plasma-sprayed TBCs / E. Trunova, R. Herzog, T. Wakui, R.W. Steinbrech, E. Wessel, L. Singheiser -- Stability of silicon nitride coated with lutetium disilicate in an oxidative environment / Tomohiro Suetsuna, Motohide Ando, Masato Ishizaki, Tatsuki Ohji, Masahiro Asayama -- Effect of scattering on the combined reflection and thermal radiation emission of a typical semitransparent TBC material / Charles M. Spuckler -- Behavior of sputter deposited alumina thin films under subcritical hydrothermal conditions / Sang Tae Park, Ronald H. Baney -- Stability and performance of high emissivity coatings for radiation coupled thermionic converters / Paul N. Clark, Bryan H.C. Chen, William H. Robertson, Holger H. Streckert -- Functionally graded CVD mullite environmental barrier coatings / S.N. Basu, V.K. Sarin -- Corrosion mechanism of Lu₂Si₂O7 phase in static state water vapor environment / Shunkichi Ueno, D. Doni Jayaseelan, Naoki Kondo, Tatsuki Ohji, Shuzo Kanzaki -- Examination of fracture process and environmental resistance of ceramic matrix composites (SiC/SiC) / Mitsutoshi Okada, Isao Yuri, Tohru Hisamatsu, Akito Nitta, Tsuneji Kameda, Yoshiyuki Yasutomi -- Corrosion of ceramic materials in hot gas environment / Hagen Klemm, Marco Fritsch, Bjoern Schenk -- Optimizing Cu-Cr coatings for environmental protection of copper alloys / Linus U. Ogbuji -- Characterization of Y₂O₃-doped La₂Zr₂O7 based EB-PVD thermal barrier coatings using X-ray microtomography (CMT) and small angle neutron scattering (SANS) / B. Saruhan, A. Flores Renteria, F. Decarlo, A. Kulkarni, J. Ilavsky -- Growth of thermally grown oxide on (Ni, Pt)Al bondcoat during short term oxidation / S. Laxman, Y.H. Sohn, K.S. Murphy -- Measuring and modeling residual stresses in air plasma spray thermal barrier coatings / Xiaoqun Chen, Jalees Ahmad, Jeff Price -- Formation of environmental barrier coating on Si₃N₄ by gas-pressure sintering / D. Doni Jayaseelan, S. Ueno, N. Kondo, T. Ohji, S. Kanzaki -- Wear of a bioceramic dental restorative material by tooth brushing / Anna Pallas, Håkan Engqvist, L.-Å. Lindén, Leif Hermansson -- Depth-profiling of composition and texture in human tooth enamel : a functionally graded material / I.M. Low -- Morphologies of precipitate in the carbonate plus phosphate aqueous solution / Wen-Yi Huang, Tzer-Shin Sheu -- Calcium phosphate ceramics as substrate for cartilage cultivation / Rolf Janssen, Stephanie Nagel-Heyer, Christiane Goepfert, Ralf Pörtner, Derya Toykan, Oliver Krummhauer, Michael Morlock, Peter Adamietz, Norbert M. Meenen, Waltraud M. Kriven, Dong-Kyu Kim, Anna Tampieri, Giancarlo Celotti -- Resorbable polymer-ceramic composites for orthopedic scaffold applications / R. Vaidyanathan, B. Hecht, A. Studley, T. Phillips, P.D. Calvert, B. Tellis, A. Coleman, J. Szivek -- Nanoceramics as drug delivery carriers / Waltraud M. Kriven, Seo-Young Kwak, Matthew A. Wallig, Tomas Martin-Jimenez, Robert B. Clarkson, Barbara E. Kitchell, Jin-Ho Choy -- Chemical processing of brushite : its conversion to apatite or Ca₂P₂O7 / A. Cuneyt Tas, Sarit B. Bhaduri -- Chemical interactions between Ca-aluminate implants and bone / H. Engqvist, M. Couillard, G.A. Botton, N. Axén, N.O. Ahnfelt, L. Hermansson -- Fabrication of novel hydroxyapatite/titanium composite coating using rf reactive plasma spraying / Y. Yokogawa, M. Inagaki, T. Kameyama -- Manufacturing of ceramic dental components by means of electro-phoretic deposition / Christian Oetzel, Jan Tabellion, Rolf Clasen -- New and conventional simulated body fluids / Hiroaki Takadama, Masami Tanahashi Hashimoto, Yorinobu Takigawa, Mineo Mizuno, Tadashi Kokubo -- Scratch testing of a dental restorative material based on calcium aluminate / Anna Pallas, Håkan Engqvist, S. Jacobsson, Leif Hermansson -- Near-shape manufacturing of complex silica glasses by electrophoretic deposition of mixtures of nanosized and coarser particles / Jan Tabellion, Rolf Clasen -- Alumina ceramics by means of electrophoretic deposition of submicron powders / Adelina Braun, Matthias Wolff, Christian Oetzel, Jan Tabellion, Guido Falk, Rolf Clasen -- Influence of the synthesis temperature on the crystallization path and kinetics of YAG powders / Paola Palmero, Laura Montanaro, Claude Esnouf, Gilbert Fantozzi -- High strength SiSiC ceramics derived from wood powders / Andreas Hofenauer, Olaf Treusch, Fritz Tröger, Michaela Gahr, Jens Schmidt, Gerd Wegener, Walter Krenkel, Jörg Fromm -- Development of screen printable sensors with templated mesoporous silica / Karin Lindqvist, Mari Arenö, Elis Carlström -- Synthesis and characterization of sol-gel derived nanostructured composite of ZnO/PVP thin film as biosensor / Tianbao Du, Hongwei Song, Olusegun J. Ilegbusi -- Microwave plasma chemical vapor deposition (CVD) of carbon based films in the system C-N / R. Ramamurti, R.S. Kukreja, L. Guo, V. Shanov, R.N. Singh -- Manufacturing of thick layers made from nanosized SiO₂ powders by dip-coating / Georg Fehringer, Rolf Clasen -- Mechanical properties of Ni embedded alumina nanocomposite thin films / S. Neralla, D. Kumar, S. Yarmolenko, J. Sankar -- Synthesis and crystal phase evaluation of hydroxylapatite using the Rietveld maximum entropy method / André Vitor Chaves de Andrade, José Caetano Zurita da Silva, Carlos Oliveira Paiva-Santos, Cleverson Weber, Vegner Hizau dos Santos Utuni, Sérgio Mazurek Tebcherani, Christiane Phihppini Ferreira Borges, Elias da Costa, Salvador Martinez Manent -- Processing and hardness of a Al₂O₃-MgAl₂O₄ nanocomposite / B.W. McEnemey, G. Quinn, V.A. Greenhut, R.K. Sadangi, V. Shukla, B. Kear, D.E. Niesz.

[pt. B/no. 4]. Properties of rare earth oxynitride glasses and the implications for high temperature behaviour of silicon nitride ceramics / Stuart Hampshire, Michael J. Pomeroy -- Mechanical properties of porous silicon nitride from fine/coarse powder mixture / Masato Ishizaki, Motohide Ando, Naoki Kondo, Tatsuki Ohji -- Production and characterization of ultra refractory HfB₂-SiC composites / Frederic Monteverde, Alida Bellosi -- Sintering behavior of dense nanocrystalline zirconia ceramics : a comparative investigation / M. Wolff, G. Falk, R. Clasen -- Direct evaluation of local thermal conduction in silicon nitrides with enhanced grain growth / Akira Okada, Toshio Hori, Takeo Okamura, Yasuyuki Niino, Jiping Ye -- Mechanical properties of pressureless sintered SiC-AlN composites obtained without sintering bed / G. Magnani, L. Beaulardi -- The influence of beta-eucryptite glassceramics on the structure and main properties of alumina ceramics / James A. Geodakyan, Aram K. Kostanyan, Karen J. Geodakyan, Svetlana T. Sagatelyan, Berta V. Petrosyan -- Mechanical behavior of SiC-polycrystalline fiber-bonded-ceramics / S. Kajii, K. Matsunaga, M. Sato, T. Ishikawa -- Design, manufacture and quality assurance of C/C-SiC composites for space transportation systems / W. Krenkel, J.M. Hausherr, T. Reimer, M. Friess -- Effect of fabrication process on internal friction of SiC/SiC composites / Hisashi Serizawa, Hiroshi Araki, Tetusji Noda, Shinji Sato, Akira Kohyama -- Effect of interphase on transthickness tensile strength of high-purity silicon carbide composites / T. Hinoki, Y. Maki, A. Kohyama, E. Lara-Curzio, L.L. Snead -- Through-thickness properties of 2D woven SiC/SiC panels with various microstructures / H.M. Yun, J.A. Dicarlo -- An assessment of variability in the average tensile properties of a melt-infiltrated SiC/SiC composite / Sreeramesh Kalluri, Anthony M. Calomino, David N. Brewer -- Net shape manufacturing of fabric reinforced oxide/oxide components via resin transfer moulding and pyrolysis / Bernhard Heidenreich, Walter Krenkel, Martin Friess, Heiner Gedon -- In-situ reaction depposition coating of LaPO₄ on Al₂O₃ fabric cloth for Al₂O₃/Al₂O₃ composites / Toyohiko Yano, Pengyuan Lee, Masamitsu Imai -- Effect of alkali choice on geopolymer properties / Waltrud M. Kriven, Jonathan L. Bell -- Thermal shock resistance of Nextel 610 and Nextel 720 continuous fiber-reinforced mullite matrix composites / Reinhard A. Simon, Peter Supancic -- Tensile properties of Nextel 720-based tows and minicomposites subjected to high-temperature soaking / D.M. Pai, S. Yarmolenko, B. Kailasshankar, C. Murphy, J. Sankar, L.P. Zawada -- Effect of monazite coating on tensile behavior of Nextel 720 fibers at high temperatures / D.M. Pai, S. Yarmolenko, E. Freeman, J. Sankar, L.P. Zawada -- BN interphase processed by LP-CVD from tris(dimethylamino)borane and characterized using SiC/SiC minicomposites / S. Jacques, B. Bonnetot, M.-P. Berthet, H. Vincent -- Oxidation effects on mechanical and electrical properties of electroconductive ceramic composites / Alida Bellosi, Valentina Medri, Diletta Sciti -- Oxidation kinetics and strength degradation of carbon fibers in a cracked ceramic matrix composite / Michael C. Halbig -- Mechanical behavior and oxidation-resistance of an orthogonal 3D [beta]-SiC fiber/carbon matrix composite / Takuya Aoki, Toshio Ogasawara, Takashi Ishikawa -- Mechanical properties of ceramic matrix composites exposed to rig tests / G.Y. Richardson, C.S. Lei, Raj N. Singh -- Composition and microstructural design for improved wear properties in SiAlON ceramics / Mark I. Jones, Kiyoshi Hirao, Yukihiko Yamauchi, Hideki Hyuga -- Plasma-treated silicon nitrides exhibiting ultra-low friction / Akira Okada, Toshio Hori, Kenichi Ueoka, Jiping Ye -- Tribological properties of Si₃N₄/Si₃N₄-BN alternate layered composites / Takashi Hirao, Kiyoshi Hirao, Yukihiko Yamauchi -- A motorcycle brake system with C/C-SiC composite brake discs / Zmago Stadler, Tomaž Kosmač, Mihael Kermc, Aleš Dakskobler -- The tribological property effects of graphite within a composite pad-cast iron braking system / Séverine Ramousse -- High performance C/C-SiC brake pads / Walter Krenkel, Hussam Abu El-Hija, Michael Kriescher -- Sliding contact damage of Y- [alpha]/[beta] composite SiAlON ceramics / Wataru Kanematsu, Mark I. Jones, Kiyoshi Hirao -- Processing and wear behavior of Cr-Al₂O₃-ZrO₂ and Mo-Al₂O₃-ZrO₂ composites / R. Janssen, S. Scheppokat, G. De Portue, R. Hannink, N. Claussen -- Improving performance of polycrystalline diamond components in three-cone roller bits using fibrous monolith technology / Anthony Griffo, Dan Belnap -- Enhancement of the fracture resistance of SiC fiber (Nicalon)/SiC refractory composites / Tomohiro Tanaka, Shigeru Fukumaru, Hiroshi Ichikawa, Hiroshi Abe -- Critical frontal process zone evaluation of aluminum titanate/alumina based ceramics by SEVNB technique / Chun-Hong Chen, Hideo Awaji -- Atomistic study of crack propagation near the Cu(111)/Al₂O₃(0001) interface / Sergey V. Dmitriev, Nobuhiro Yoshikawa, Makoto Hasegawa, Yutaka Kagawa, Masanori Kohyama, Shingo Tanaka -- Sensitivity of silicon carbide and other ceramics to edge fracture : method and results / George Gogotsi, Sergey Mudrik, Andreas Rendtel -- Determination of elastic properties of a ceramic-based joint using a digital image correlation method / Matthieu Puyo-Pain, Jacques Lamon -- Evaluation of four different experimental techniques for determination of elastic properties of solids / Miladin Radovic, Edgar Lara-Curzio, Laura Riester -- Strength testing system for ceramic grains / Kristin Breder, Edgar Lara-Curzio, Laura Riester -- Characterization of C/enhanced SiC composite during creep rupture tests using an ultrasonic guided wave scan system / Don J. Roth, Michael J. Verrilli, Richard E. Martin, Laura M. Cosgriff -- Design of a high temperature test device for bidirectional loading for CMC samples / I. Fischer, T. Reimer, H. Weihs -- Biaxial strength test of discs of different size using the ball on three balls test / Andreas Börger, Robert Danzer, Peter Supancic -- Atomic force microscopy study of the surface degradation mechanisms of zirconia based ceramics / Sylvain Deville, Jérôme Chevalier, Gilbert Fantozzi, Ramón Torrecillas, José F. Bartolomé, José S. Moya -- Internal pressure testing of structural ceramic tubes / R.H. Carter, J.J. Swab -- Characterization of Si₃N₄ bars extracted from various regions of a billet by resonance and flex testing / G. Ojard, T. Barnett, M. Ferber, K. Johnson -- Laser scattering characterization of subsurface defect/damage in silicon-nitride ceramic valves / J.G. Sun, J.M. Zhang, M.J. Andrews -- A model for the bulk mechanical response of porous ceramics exhibiting a ferroelectric-to-antiferroelectric phase transition during hydrostatic compression / Stephen T. Montgomery, David H. Zeuch -- Random local load sharing in multifilament bundles : modelling and influence on ceramic matrix composite failure / V. Calard, J. Lamon -- Experimental and numerical fluid-structure investigations of a generic bodyflap region model / Roger Schaefer, Burkard Esser, Ali Guelhan, Andreas Mack.

[pt. A/no. 3]. Ceramic components in gas turbine engines : why has it taken so long? / David W. Richerson -- Development of the 8000 kW class hybrid gas turbine / Takao Sugimoto, Yoshihiro Ichikawa, Hitoshi Nagata, Kenichiroh Igashira, Sazo Tsuruzono, Takero Fukudome -- Development and evaluation of CMC Vane for NGSST engine / Akira Kajiwara, Takeshi Nakamura, Takahito Araki, Hiroshige Murata -- Ceramic combustor design for ST5+ microturbine engine / Jun Shi, Venkata Vedula, Ellen Sun, David Bombara, John Holowczak, William Tredway, Alex Chen, Catalin Fotache -- CMC combustor liner design for a model RAM jet engine / Tetsuya Morimoto, Shinji Ogihara, Hideyuki Taguchi, Takayuki Kojima, Kazuo Shimodaira, Keiichi Okai, Hisao Futamura -- Burner rig test of silicon nitride gas turbine nozzle / Masato Ishizaki, Tomohiro Suetsuna, Masahiro Asayama, Motohide Ando, Naoki Kondo, Tatsuki Ohji -- Materials for advanced battery and energy storage systems (batteries, capacitors, fuel cells) / Alvin J. Salkind -- Effect of Ni-Al precursor type on fabrication and properties of Tic-Ni₃Al composites / T.N. Tiegs, F.C. Montgomery, P.A. Menchhofer -- MMCs by activated melt infiltration : high-melting alloys and oxide ceramics / J. Kuebler, K. Lemster, Ph. Gasser, U.E. Klotz, T. Graule -- Multifunctional metal-ceramic composites by solid free forming (SFF) / Rolf Janssen, Mark Leverkoehne, Jose J. Coronel -- Solid freeform fabrication of a piezoelectric ceramic torsional actuator motor / Barry A. Bender, Chulho Kim, Carl Cm. Wu -- Centrifugal sintering / Y. Kinemuchi, K. Watari, S. Uchimura -- Alumna-based functionally gradient materials by centrifugal molding technology / Chun-Hong Chen, Tadahiro Nishikawa, Sawao Honda, Hideo Awaji -- Investigation of a novel air brazing composition for high-temperature, oxidation-resistant ceramic joining / K. Scott Weil, John S. Hardy, Jens Darsell -- Joining of advanced structural materials by plastic deformation / D. Singh, N. Chen, K.C. Goretta, J.L. Routbort, F. Gutierrez-Mora -- Mechanical performance of advanced ceramic parts joined by plastic flow / F. Gutierrez-Mora, A. Dominguez-Rodriguez, D. Singh, N. Chen, K.C. Goretta, J.L. Routbort -- Physical characterisation of transparent PLZT ceramics prepared by electrophoretic deposition / Thomas Nicolay, Erik Bartscherer -- Fabrication of microstructured ceramics by electrophoretic deposition of optimized suspensions / H. Von Both, M. Dauscher, J. Hausselt -- Low cost process for mullite utilizing industrial wastes as starting raw material / Kachin Saiintawong, Shigetaka Wada, Angkhana Jaroenworaluck -- Low-cost processing of fine grained transparent yttrium aluminum garnet / Heedong Lee, Tai-Il Mah, Triplicane A. Parthasarathy -- Gas-pressure sintering of silicon nitride with lutetia additive / Naoki Kondo, Masato Ishizaki, Tatsuki Ohji -- Use of combustion synthesis in preparing ceramic-matrix and metal-matrix composite powders / K. Scott Weil, John S. Hardy -- Mechanical reliability of Si₃N₄ / Kedar Sharma, P.S. Shankar, J.P. Singh, M.K. Ferber -- Correlation of finite element with experimental results of the small-scale vibration response of a damaged ceramic beam / Scott R. Short, Shihong Huo -- Macro-micro stress analysis of porous ceramics by homogenization method / Yasushi Ikeda, Yasuo Nagano, Hiroshi Kawamoto, Naoki Takano -- X-ray and neutron diffraction studies on a functionally-graded Ti₃SiC₂-TiC system / I.M. Low, Z. Oo -- Modeling of transient thermal damage in ceramics for cannon bore applications / J.H. Underwood, M.E. Todaro, G.N. Vigilante -- Strengthening of ceramics by shot peening / Wulf Pfeiffer, Tobias Frey -- DOE FE distributed generation program / Mark C. Williams -- Lanthanum gallate electrolyte for intermediate temperature SOFC operation / S. Elangovan, B. Heck, S. Balagopal, D. Larsen, M. Timper, J. Hartvigsen -- Solid oxide fuel cell development at Forschungszentrum Juelich / Ludger Blum, Hans-Peter Buchkremer, L.G.J. Haart, Heinz Nabielek, Jo Willem Quadakkers, Uwe Reisgen, Robert Steinberger-Wilckens, Rolf W. Steinbrech, Frank Tietz, Ico Vinke -- Hitoshi Miyamoto, K. Mori Takasago, T. Mizoguchi, S. Kanehira, K. Takenobu, M. Nishiura, A. Nakanishi, M. Hattori, Y. Sakaki -- Development of advanced co-fired planar solid oxide fuel cells with high strength / Zhien Liu, Garry Roman, Jeff Kidwell, Tom Cable -- Electrophoresis : an appropriate manufacturing technique for intermediate temperature solid oxide fuel cells / Sascha Kuehn, Rolf Clasen -- Microstructure-performance relationships in LSM-YSZ cathodes / J.A. Ruud, T. Striker, V. Midha, B.N. Ramamurthi, A.L. Linsebigler, D.J. Fogelman -- Role of cathode in single chamber SOFC / Toshio Suzuki, Piotr Jasinski, Fatih Dogan, Harlan U. Anderson -- Morphology control of SOFC electrodes by mechano-chemical bonding technique / Takehisa Fukui, Kenji Murata, Ching Chung Huang, Makio Naito, Hiroya Abe, Kiyoshi Nogi -- Improved SOFC cathodes and cathode contact layers / F. Tietz, H.-P. Buchkremer, V.A.C. Haanappel, A. Mai, N.H. Menzler, J. Mertens, W.J. Quadakkers, D. Rutenbeck, S. Uhlenbruck, M. Zahid, D. Stöver -- Characterization of solid oxide fuel cell layers by computed X-ray microtomography and small-angle scattering / A.J. Allen, T.A. Dobbins, J. Ilavsky, F. Zhao, A. Virkar, J. Aimer, F. Decarlo -- Kinetics of the hydrogen reduction of NiO/YSZ and associated microstructural changes / Miladin Radovic, Edgar Lara-Curzio, Beth Armstrong, Larry Walker, Peter Tortorelli, Claudia Walls -- Elastic properties, equibiaxial strength and fracture toughness of 8mol% YSZ electrolyte material for solid oxide fuel cells (SOFCs) / Miladin Radovic, Edgar Lara-Curzio, Rosa Trejo, Beth Armstrong, Claudia Walls -- Sintering of BaCe₀.₅Y₀.₁₅O₃-[delta] with/without SrTiO₃ dopant / F. Dynys, A. Sayir, P.J. Heimann -- High temperature seals for solid oxide fuel cells (SOFC) / Raj N. Singh -- Evaluation of sodium aluminosilicate glass composite seal with magnesia filler / K.A. Nielsen, M. Solvang, F.W. Poulsen, P.H. Larsen -- Durable seal materials for planar solid oxide fuel cells / C.A. Lewinsohn, S. Elangovan, S.M. Quist -- Development of a compliant seal for use in planar solid oxide fuel cells / K. Scott Weil, John S. Hardy -- A comparison of the electrical properties of YSZ processed using traditional, fast-fire, and microwave sintering techniques / Michael Ugorek, Doreen Edwards, Holly Shulman -- Enhancement of YSZ electrolyte thin film growth rate for fuel cell applications / Zhigang Xu, Jag Sankar -- Synthesis of yttria stabilized zirconia thin films by electrolytic deposition / Zhigang Xu, Samuel Tameru, Jag Sankar -- Sintering and stability of the BaCe₀.₉xZrxY₀.₁O₃[delta] system / Z. Zhong, A. Sayir, F. Dynys -- Microstructure and ordering mode of a protonic conducting complex Sr₃(Ca₁₊xNb₂-x)O₉-[delta] perovskite / Marie-Hélène Berger, Ali Sayir -- Nuclear microprobe using elastic recoil detection (ERD) for hydrogen profiling in high temperature protonic conductors / Pascal Berger, Ali Sayir, Marie-Hélène Berger -- Ionic conductivity in the Bi₂O₃-Al₂O₃-MxOy (M=Ca, Y) system / Yi-Tzuen Liu, Tzer-Shin Sheu -- A performance based multi-process cost model for SOFCs / Mark Koslowske, Heather Benson, Isa Bar-On, R. Kirchain -- Development of a tri-layer electrochemical model for a solid oxide fuel cell / Badri Ramamurthi, Vikas Midha, James Ruud, Mark Thompson -- Reduction and re-oxidation of anodes for solid oxide fuel cells (SOFC) / Jürgen Malzbender, Egbert Wessel, Rolf W. Steinbrech, Lorenz Singheiser-- Numerical characterization of the fracture behavior of solid oxide fuel cell materials by means of modified boundary layer modeling / Ba Nghiep Nguyen, Brian J. Koeppel, Prabhakar Singh, Mohammad A. Khaleel, Said Ahzi -- Chromium poisoning of cathodes by ferritic stainless steel / T.D. Kaun, T.A. Cruse, M. Krumpelt -- Effect of impurities on anode performance / C.A.-H. Chung, K.V. Hansen, M. Mogensen.