Electrocoagulation Treatment of Metal Finishing Wastewater: Fid-Bau Portal

Electrocoagulation Treatment of Metal Finishing Wastewater

Odongo, Isabel E. / McFarland, Michael J.

Electrocoagulation has been found to be a consistent and reliable industrial wastewater treatment process capable of removing heavy metals to levels well below pretreatment discharge standards. Results from the testing of a 113 L/min pilot scale electrocoagulation unit indicated that electrocoagulation was capable of decreasing the cadmium, chromium, and nickel concentrations from 0.14, 18.1, and 0.06 parts per million (ppm) to 0.029, 0.039, and 0.020 ppm respectively, at a 1‐min hydraulic retention time.

In the presence of a strong chelating substance, electrocoagulation performance was found to be effective in reducing both chromium and nickel concentrations to levels well below discharge limits. At a pH of 8.0, chromium and nickel influent concentrations of 0.328 and 0.062 ppm, respectively, were reduced to 0.005 and 0.04 ppm. The electrocoagulation removal efficiency for chromium remained high at over 98% and appeared to be unaffected by the presence of chelating substances.

Utilizing aluminum as the sacrificial anode improved the removal efficiency of targeted heavy metals when the industrial wastewater was treated under acidic conditions. At a pH of 5.6, the influent concentrations of the regulated heavy metals cadmium, chromium, and nickel were reduced from 0.55, 49.7, and 13.7 ppm, respectively, to 0.013, 2.7, and 0.8 ppm at a 1‐min hydraulic retention time. The results of these tests suggest that the formation of ferric hydroxide and aluminum hydroxide through the electrocoagulation process may be an effective approach for treating metal finishing wastewaters.