A platform for research: civil engineering, architecture and urbanism
A platform for research: civil engineering, architecture and urbanism
Peen Forming of Ceramics ‐ a New Chipless Shaping Technique
Thin ceramic components are often distorted during production due to anisotropic shrinkage and/or residual stresses due to machining. If unwanted distortion is detected in a component in its final shape, the distortion cannot be eliminated by additional material removal. Such ceramic components are usually discarded since their brittleness does not permit further flattening. Ceramic parts with complex shapes must be fabricated by, for example, sintering close to the desired shape followed by a costly 3D machining process. This paper describes the first successful experiments aimed at shaping ceramic specimens using shot peening. Strips of different thicknesses made of silicon nitride ceramic were shot‐peened using different shot peening parameters. The residual stress‐depth distributions were determined using X‐ray diffraction. Based on the experimentally‐determined stress states, the curvatures of the strips were determined analytically and using Finite Element (FE) calculations. Silicon nitride flat springs and a concave mirror could be peen‐formed without the need of additional hard machining. FE calculations demonstrated the capability of designing peen forming processes on basis of experimentally‐determined peening stresses.
Peen Forming of Ceramics ‐ a New Chipless Shaping Technique
Thin ceramic components are often distorted during production due to anisotropic shrinkage and/or residual stresses due to machining. If unwanted distortion is detected in a component in its final shape, the distortion cannot be eliminated by additional material removal. Such ceramic components are usually discarded since their brittleness does not permit further flattening. Ceramic parts with complex shapes must be fabricated by, for example, sintering close to the desired shape followed by a costly 3D machining process. This paper describes the first successful experiments aimed at shaping ceramic specimens using shot peening. Strips of different thicknesses made of silicon nitride ceramic were shot‐peened using different shot peening parameters. The residual stress‐depth distributions were determined using X‐ray diffraction. Based on the experimentally‐determined stress states, the curvatures of the strips were determined analytically and using Finite Element (FE) calculations. Silicon nitride flat springs and a concave mirror could be peen‐formed without the need of additional hard machining. FE calculations demonstrated the capability of designing peen forming processes on basis of experimentally‐determined peening stresses.
Peen Forming of Ceramics ‐ a New Chipless Shaping Technique
Kriven, Waltraud M. (editor) / Zhu, Dongming (editor) / Moon, Kyoung II (editor) / Hwang, Taejin (editor) / Wang, Jingyang (editor) / Lewinsohn, Charles (editor) / Zhou, Yanchun (editor) / Pfeiffer, Wulf (author) / Höpfel, Heiko (author)
2014-12-19
8 pages
Article/Chapter (Book)
Electronic Resource
English
Numerical Simulation on Laser Peen Forming of Sheet Metal
| British Library Online Contents | 2008
Experimental Investigations of Different Tool Concepts for Rotary Peen Forming
| British Library Online Contents | 2013
The Mechanism and Experimental Study on Laser Peen Forming of Sheet Metal
| British Library Online Contents | 2006
Prediction of Shot Peen Forming Parameters of Integral Aircraft Wing Panels
| British Library Online Contents | 2007
A New Tool Concept for Rotary Peen Forming with Defined Impact Positions
| British Library Online Contents | 2012