A platform for research: civil engineering, architecture and urbanism
A platform for research: civil engineering, architecture and urbanism
Mechanisms and modes for ignition of low‐voltage, PVC‐insulated electrotechnical products
10.1002/fam.900.abs
PVC is the most common insulation material used for wiring in low‐voltage (LV) service. ‘Low‐voltage’, in the context of this paper, is taken to be 120–240 VAC. The electrotechnical products considered include insulated wires, cables and cords, and also appurtenant termination devices, e.g. male plugs or female taps. Well‐known factors leading to the ignition of PVC‐insulated wiring and related products include: (a) manufacturing defects; (b) grossly excessive current; (c) over‐insulation, sometimes augmented by overcurrent; (d) localized heating due to strand breakage; (e) localized heating due to mechanical strand severing by staples or nails; and (f) localized heating due to failed terminations. Other failure modes are known but have received only limited study. These include (i) excessive force and creep; (ii) chemical interaction effects; and (iii) breakdown under voltage surge conditions. Additional research is needed in these areas. The proximate cause of ignition involved with many of the above mechanisms is arc tracking (arcing across a carbonized path). In turn, it is shown that PVC is especially susceptible to becoming charred, it requiring only approximately 160°C for the material to become semiconducting during short‐term exposure (around 10 h), while longer‐term exposure (around 1 month) may cause failures at temperatures as low as 110°C. Some limited data exist which suggest that standard UL and IEC temperature classifications are unduly optimistic, as applied to PVC. Fire can originate if wiring or equipment cannot withstand a powerline surge. Mains‐connected electrical appliances need to be designed to resist 6000 V surge voltages, even though this is not mandated in most of the current UL and IEC standards. Data are presented showing that the IEC 60112 wet‐tracking test gives especially misleading results for PVC and should be improved or abrogated. Copyright © 2005 John Wiley & Sons, Ltd.
Mechanisms and modes for ignition of low‐voltage, PVC‐insulated electrotechnical products
10.1002/fam.900.abs
PVC is the most common insulation material used for wiring in low‐voltage (LV) service. ‘Low‐voltage’, in the context of this paper, is taken to be 120–240 VAC. The electrotechnical products considered include insulated wires, cables and cords, and also appurtenant termination devices, e.g. male plugs or female taps. Well‐known factors leading to the ignition of PVC‐insulated wiring and related products include: (a) manufacturing defects; (b) grossly excessive current; (c) over‐insulation, sometimes augmented by overcurrent; (d) localized heating due to strand breakage; (e) localized heating due to mechanical strand severing by staples or nails; and (f) localized heating due to failed terminations. Other failure modes are known but have received only limited study. These include (i) excessive force and creep; (ii) chemical interaction effects; and (iii) breakdown under voltage surge conditions. Additional research is needed in these areas. The proximate cause of ignition involved with many of the above mechanisms is arc tracking (arcing across a carbonized path). In turn, it is shown that PVC is especially susceptible to becoming charred, it requiring only approximately 160°C for the material to become semiconducting during short‐term exposure (around 10 h), while longer‐term exposure (around 1 month) may cause failures at temperatures as low as 110°C. Some limited data exist which suggest that standard UL and IEC temperature classifications are unduly optimistic, as applied to PVC. Fire can originate if wiring or equipment cannot withstand a powerline surge. Mains‐connected electrical appliances need to be designed to resist 6000 V surge voltages, even though this is not mandated in most of the current UL and IEC standards. Data are presented showing that the IEC 60112 wet‐tracking test gives especially misleading results for PVC and should be improved or abrogated. Copyright © 2005 John Wiley & Sons, Ltd.
Mechanisms and modes for ignition of low‐voltage, PVC‐insulated electrotechnical products
Babrauskas, Vytenis (author)
Fire and Materials ; 30 ; 151-174
2006-03-01
24 pages
Article (Journal)
Electronic Resource
English
Mechanisms and modes for ignition of low-voltage, PVC-insulated electrotechnical products
| Online Contents | 2006
Mechanisms and modes for ignition of low-voltage, PVC-insulated electrotechnical products
| British Library Online Contents | 2006
Fire Scenarios and Total Fire Hazard Analysis involving Electrotechnical Products
| British Library Conference Proceedings | 1994
TURBINES - International Electrotechnical Commission standards
Online Contents | 2000