Emulsion liquid membrane modeling for chromium removal from electroplating wastewater using TOMAC as a carrier: Fid-Bau Portal

Emulsion liquid membrane modeling for chromium removal from electroplating wastewater using TOMAC as a carrier

Othman, Norasikin / Noah, Norul Fatiha Mohamed / Sulaiman, Raja Norimie Raja / Jusoh, Norela / Tan, Wan Ting

Hexavalent chromium, emanating primarily from the electroplating industries, can be reduced to the less toxic trivalent variety by several methods, including emulsion liquid membrane (ELM). In this work, studies on the continuous removal of chromium from authentic electroplating wastewater by ELM are reported. The effects of treat ratio, external feed phase, and stripping agent concentration were examined. A mathematical boundary breakage model was used to study the extraction efficiency of chromium through the ELM process. The model representing the prediction of ELM extraction performance for chromium was validated through the comparison between the simulation and experimental results. The result showed the simulation model is found to be in good agreement with the experimental result. Almost 100% of 40 ppm chromium in the external feed phase was extracted within 3 to 5 min using 0.022 M TOMAC as extractant, 1.0 M acidic thiourea in the internal phase, and 1 to 5 of treat ratio.

Hexavalent chromium, emanating primarily from electroplating industries, can be reduced to the less toxic trivalent using ELM process. The developed method was tested for its applicability with predominant species of Cr₂O₇²⁻ in real rinse electroplating wastewater. The extraction efficiency (%) of Cr (VI) was almost 100% for 40 ppm Cr in the external feed phase within 3 to 5 min. The result showed the simulation model is found to be in good agreement with the experimental result.