Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Results from core-edge experiments in high Power, high performance plasmas on DIII-D
Significant challenges to reducing divertor heat flux in highly powered near-double null divertor (DND) hybrid plasmas, while still maintaining both high performance metrics and low enough density for application of RF heating, are identified. For these DNDs on DIII-D, the scaling of the peak heat flux at the outer target (q⊥P) ∝ [PSOL x IP] 0.92 for PSOL= 8−19MW and IP= 1.0–1.4MA, and is consistent with standard ITPA scaling for single-null H-mode plasmas. Two divertor heat flux reduction methods were tested. First, applying the puff-and-pump radiating divertor to DIII-D plasmas may be problematical at high power and H98 (≥ 1.5) due to improvement in confinement time with deuterium gas puffing which can lead to unacceptably high core density under certain conditions. Second, q⊥P for these high performance DNDs was reduced by ≈35% when an open divertor is closed on the common flux side of the outer divertor target (“semi-slot”) but also that heating near the slot opening is a significant source for impurity contamination of the core. PSI-22 keywords: DIII-D, Divertor geometry, Gas injection and fueling, Impurity sources, Power deposition
Results from core-edge experiments in high Power, high performance plasmas on DIII-D
Significant challenges to reducing divertor heat flux in highly powered near-double null divertor (DND) hybrid plasmas, while still maintaining both high performance metrics and low enough density for application of RF heating, are identified. For these DNDs on DIII-D, the scaling of the peak heat flux at the outer target (q⊥P) ∝ [PSOL x IP] 0.92 for PSOL= 8−19MW and IP= 1.0–1.4MA, and is consistent with standard ITPA scaling for single-null H-mode plasmas. Two divertor heat flux reduction methods were tested. First, applying the puff-and-pump radiating divertor to DIII-D plasmas may be problematical at high power and H98 (≥ 1.5) due to improvement in confinement time with deuterium gas puffing which can lead to unacceptably high core density under certain conditions. Second, q⊥P for these high performance DNDs was reduced by ≈35% when an open divertor is closed on the common flux side of the outer divertor target (“semi-slot”) but also that heating near the slot opening is a significant source for impurity contamination of the core. PSI-22 keywords: DIII-D, Divertor geometry, Gas injection and fueling, Impurity sources, Power deposition
Results from core-edge experiments in high Power, high performance plasmas on DIII-D
T.W. Petrie (Autor:in) / M.E. Fenstermacher (Autor:in) / C.T. Holcomb (Autor:in) / T.H. Osborne (Autor:in) / S.L. Allen (Autor:in) / J.R. Ferron (Autor:in) / H.Y. Guo (Autor:in) / C.J. Lasnier (Autor:in) / A.W. Leonard (Autor:in) / T.C. Luce (Autor:in)
2017
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Metadata by DOAJ is licensed under CC BY-SA 1.0
High-performance double-null plasmas under radiating mantle scenarios on DIII-D
| DOAJ | 2019
EDGE2D-EIRENE predictions of molecular emission in DIII-D high-recycling divertor plasmas
| DOAJ | 2019