Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Influence of slag composition on the hydration of alkali-activated slags
The hydration of different blast-furnace slags with sodium metasilicate or NaOH as activator was investigated. Sodium metasilicate shows poor strength after 1 day, but high strength after 7 days and beyond, whereas NaOH activation leads to high strength after 1 day , but only moderate strength development at later ages. At the same hydration degree, sodium metasilicate activation gives a much higher compressive strength than NaOH activation. This is due to the formation of a dense hydration product in the NaOH-activated system at the early age, which leads to a more porous microstructure than in the case of sodium metasilicate. A higher MgO content in the slags is beneficial with respect to faster hydration kinetics and a more rapid strength development. Increasing Al2O3 contents lead to slightly slower hydration kinetics and slightly lower compressive strengths. The best correlation between compressive strength and slag composition was found using the extended basicity (CaO + MgO)/SiO2 index.
Influence of slag composition on the hydration of alkali-activated slags
The hydration of different blast-furnace slags with sodium metasilicate or NaOH as activator was investigated. Sodium metasilicate shows poor strength after 1 day, but high strength after 7 days and beyond, whereas NaOH activation leads to high strength after 1 day , but only moderate strength development at later ages. At the same hydration degree, sodium metasilicate activation gives a much higher compressive strength than NaOH activation. This is due to the formation of a dense hydration product in the NaOH-activated system at the early age, which leads to a more porous microstructure than in the case of sodium metasilicate. A higher MgO content in the slags is beneficial with respect to faster hydration kinetics and a more rapid strength development. Increasing Al2O3 contents lead to slightly slower hydration kinetics and slightly lower compressive strengths. The best correlation between compressive strength and slag composition was found using the extended basicity (CaO + MgO)/SiO2 index.
Influence of slag composition on the hydration of alkali-activated slags
Winnefeld, Frank (Autor:in) / Ben Haha, Mohsen (Autor:in) / Le Saout, Gwenn (Autor:in) / Costoya, Mercedes (Autor:in) / Ko, Suz-Chung (Autor:in) / Lothenbach, Barbara (Autor:in)
Journal of Sustainable Cement-Based Materials ; 4 ; 85-100
03.04.2015
16 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Hydration Products of Alkali Activated Slag Cement
Online Contents | 1995
|Hydration of alkali-activated slag: thermodynamic modelling
Online Contents | 2007
|Hydration Products of Alkali Activated Slag Cement
British Library Online Contents | 1995
|Kinetic study on hydration of alkali-activated slag
Tema Archiv | 1993
|Kinetic Study on Hydration of Alkali-Activated Slag
British Library Online Contents | 1993
|