A platform for research: civil engineering, architecture and urbanism
A platform for research: civil engineering, architecture and urbanism
Performance of reinforced concrete slabs under punching loads
https://orcid.org/http://orcid.org/0000-0002-3982-8142
The experimental program of this study consisted of 12 slab specimens. The parameters investigated include ratio of reinforcement in compression and tension, amount of shear reinforcement and arrangement of shear reinforcement. Flexural reinforcement ratio especially in tension had a noticeable effect on the mode of failure and ultimate punching capacity of slabs. The enhancement in the ultimate loads due to increasing tensile reinforcement ratio was ranging between 26.0 and 42.0%. Slightly enhancement (up to 12%) in ultimate loads was observed as a result of increasing compressive steel ratio. Provision of shear reinforcement was shown to be increased the perimeter of the failure. The ultimate loads were increased with the addition of single leg stirrups as shear reinforcement particularly in case of radial arrangement of shear reinforcement. The ECCS shows the most conservative prediction for punching shear capacity specially in case of using shear reinforcement and the mean predicted-to-experimental ultimate load is shown to be 0.7. The predictions following the ACI and CSA are closet to the experimental results. The mean predicted-to-experimental ultimate load is shown to be 0.8 for ACI and 0.96 for CSA. The BS provisions for punching shear analysis were shown to be overestimated in some cases, where the mean predicted-to-experimental ultimate load is shown to be 1.19.
Performance of reinforced concrete slabs under punching loads
https://orcid.org/http://orcid.org/0000-0002-3982-8142
The experimental program of this study consisted of 12 slab specimens. The parameters investigated include ratio of reinforcement in compression and tension, amount of shear reinforcement and arrangement of shear reinforcement. Flexural reinforcement ratio especially in tension had a noticeable effect on the mode of failure and ultimate punching capacity of slabs. The enhancement in the ultimate loads due to increasing tensile reinforcement ratio was ranging between 26.0 and 42.0%. Slightly enhancement (up to 12%) in ultimate loads was observed as a result of increasing compressive steel ratio. Provision of shear reinforcement was shown to be increased the perimeter of the failure. The ultimate loads were increased with the addition of single leg stirrups as shear reinforcement particularly in case of radial arrangement of shear reinforcement. The ECCS shows the most conservative prediction for punching shear capacity specially in case of using shear reinforcement and the mean predicted-to-experimental ultimate load is shown to be 0.7. The predictions following the ACI and CSA are closet to the experimental results. The mean predicted-to-experimental ultimate load is shown to be 0.8 for ACI and 0.96 for CSA. The BS provisions for punching shear analysis were shown to be overestimated in some cases, where the mean predicted-to-experimental ultimate load is shown to be 1.19.
Performance of reinforced concrete slabs under punching loads
https://orcid.org/http://orcid.org/0000-0002-3982-8142
The experimental program of this study consisted of 12 slab specimens. The parameters investigated include ratio of reinforcement in compression and tension, amount of shear reinforcement and arrangement of shear reinforcement. Flexural reinforcement ratio especially in tension had a noticeable effect on the mode of failure and ultimate punching capacity of slabs. The enhancement in the ultimate loads due to increasing tensile reinforcement ratio was ranging between 26.0 and 42.0%. Slightly enhancement (up to 12%) in ultimate loads was observed as a result of increasing compressive steel ratio. Provision of shear reinforcement was shown to be increased the perimeter of the failure. The ultimate loads were increased with the addition of single leg stirrups as shear reinforcement particularly in case of radial arrangement of shear reinforcement. The ECCS shows the most conservative prediction for punching shear capacity specially in case of using shear reinforcement and the mean predicted-to-experimental ultimate load is shown to be 0.7. The predictions following the ACI and CSA are closet to the experimental results. The mean predicted-to-experimental ultimate load is shown to be 0.8 for ACI and 0.96 for CSA. The BS provisions for punching shear analysis were shown to be overestimated in some cases, where the mean predicted-to-experimental ultimate load is shown to be 1.19.
Performance of reinforced concrete slabs under punching loads
Mater Struct
Said, Mohamed (author) / Mahmoud, Ahmed A. (author) / Salah, Ahmed (author)
2020-06-23
Article (Journal)
Electronic Resource
English
Performance of reinforced concrete slabs under punching loads
| Online Contents | 2020
Punching strength of reinforced concrete slabs
| Engineering Index Backfile | 1966
Punching of Restrained Reinforced Concrete Slabs
| NTIS | 1991
Punching Shear in Reinforced Concrete Slabs
| British Library Conference Proceedings | 2002
Behavior of High-Strength Lightweight Concrete Slabs under Punching Loads
| Online Contents | 2000