A platform for research: civil engineering, architecture and urbanism
A platform for research: civil engineering, architecture and urbanism
Influence of Aspect Ratio of Macro Synthetic Fiber on Mechanical Properties of Shotcrete
Influences of moisture content and loading rate on flexural toughness were experimentally studied for fiber reinforced shotcrete (FRSC) with steel fiber or macro synthetic polypropylene fiber. According to the four-point bending test method specified in ASTM C1609 and Chinese standard CECS 13, the flexural toughness of specimens after drying for 0h, 16h, 24h and 72h in condition of (20±2)°C and (60±5)% relative humidity was tested at a loading rate of 0.05 mm/min. For specimens after drying for 24h and 72h, flexural toughness was tested at loading rates of 0.05 mm/min, 0.10 mm/min, and 0.20 mm/min respectively. With the moisture content decreasing, the flexural toughness T100,2.0, first-peak flexural strength, and residual flexural strength at prescribed deflections of FRSC exhibited decreasing tendency. The specimens with 0.5 vol% of steel fiber showed higher T100,2.0 value than that with 0.9 vol% of macro synthetic fiber. The residual strength and flexural toughness of FRSC increased with the increase of loading rate.
Influence of Aspect Ratio of Macro Synthetic Fiber on Mechanical Properties of Shotcrete
Influences of moisture content and loading rate on flexural toughness were experimentally studied for fiber reinforced shotcrete (FRSC) with steel fiber or macro synthetic polypropylene fiber. According to the four-point bending test method specified in ASTM C1609 and Chinese standard CECS 13, the flexural toughness of specimens after drying for 0h, 16h, 24h and 72h in condition of (20±2)°C and (60±5)% relative humidity was tested at a loading rate of 0.05 mm/min. For specimens after drying for 24h and 72h, flexural toughness was tested at loading rates of 0.05 mm/min, 0.10 mm/min, and 0.20 mm/min respectively. With the moisture content decreasing, the flexural toughness T100,2.0, first-peak flexural strength, and residual flexural strength at prescribed deflections of FRSC exhibited decreasing tendency. The specimens with 0.5 vol% of steel fiber showed higher T100,2.0 value than that with 0.9 vol% of macro synthetic fiber. The residual strength and flexural toughness of FRSC increased with the increase of loading rate.
Influence of Aspect Ratio of Macro Synthetic Fiber on Mechanical Properties of Shotcrete
Su, An-Shuang (author) / Cai, Yue-Bo (author)
2013
7 Seiten
Conference paper
English
Macro-synthetic fibre reinforced shotcrete in a Norwegian road tunnel
| British Library Conference Proceedings | 2004
DESIGN OF FIBRE REINFORCED SHOTCRETE LININGS WITH MACRO - SYNTHETIC FIBRES
| British Library Conference Proceedings | 2009
Behaviour and Performance of Monofilament Macro-Synthetic Fibres in Dry-Mix Shotcrete
| British Library Conference Proceedings | 2006
Synthetic fiber shotcrete composition with high strength spiral fiber composite
| European Patent Office | 2019